Introduction of STP cleaning equipment

Brush cleaner

Dust is removed from the tread surface groove.
Most dirt is the hopper of the main body But the floating dustSuction with vacuum cleaner from the rear This cleaner can collect dust, solids, liquids and semi-solids.

Vacuum cleaner

Power supply: AC100V Power consumption: 1050 W Suction work rate: 320 w
Degree of vacuum: 24 kPa
Air flow: 3.6 cubic meters / min

separator

A device installed between the nozzle for riser dampening, the dampening nozzle for treadle, the brush cleaner and the vacuum cleaner, and the dirt can be received by the pail.

Riser brush

Oil and dust sludge attached to the riser I will scrape it off.
Cleaning width: 250 mm

Riser wet nozzle

Absorb dirt on riser groove with detergent.

Vacuum nozzle

Step board wet nozzle

Vacuum nozzle which sucks in dirt on groove of tread plate with detergent.

Introduction of detergent

ESW-FK-Ⅲ

Quickly break down oil stains and leave no harm.

ESW-ALP50

Detergent is strong, detergent that does not remain.